alat ukur suhu (data logger rh & temperature)

alat ukur suhu (data logger rh & temperature)-1

alat ukur suhu (data logger rh & temperature)-2

Alat Ukur Suhu (Data Logger RH & Temperature)

Update Terakhir

10 / 12 / 2019

Min. Pembelian

1 Unit

Harga

CALL

Mealabs (baca : Milabs) merupakan perusahaan yang bergerak dalam bidang measuring (alat alat pengukuran) testing (alat Pengujian), laboratory (peralatan lab), dan peralatan survey. Tujuan kami adalah dapat andil dalam menghadirkan produk atau alat tepat guna dan efisien dalam dunia industri maupun akademisi.

Sistem kami yang simple dan fleksibel akan memudahkan anda mendapati dengan cermat kebutuhan anda. Professional dan komunikatif adalah modal utama kami dalam menjalankan bisnis ini. Segala upaya untuk inovasi terus kami lakukan demi menjawab "need" industri dan akademisi di Indonesia

Jika anda punya pertanyaan ataupun kebutuhan anda bisa hubungi team kami yang akan segera merespon anda

Deskripsi Produk Deskripsi

Detail Alat Ukur Suhu (Data Logger RH & Temperature)

Alat ukur Suhu di atas adalah sebuah alat ukur yang mampu mengukur suhu dan kelembaban secara bersamaan yang terjadi pada lingkungan tersebut, alat ini juga mampu merekam (record) nilai pengukuran suhu dan kelembabannya setiap interval yang sudah di setting sebelumnya. alat ini dibutuhkan untuk menganalisa nilai suhu ataupun nilai kelembaban yang terjadi pada lingkungan tersebut.
Jika anda membutuhkan alat tersebut silahkan untuk menghubungi kami.

Humidity

Measurement range

0~100%RH

Accuracy(Typ.)^{Figure 1}

±3%RH

Resolution

0.1%RH typically

Long Term Drift

<0.5%RH per year

Temperature

Measurement range

-35~80℃(-31~176℉)

Accuracy(Typ.)^{Figure 2}

±0.3℃(±0.5℉)

Resolution

0.1℃ / 0.2℉

Long Term Drift

Negligible

LCD

BTH01 with LCD, BTH02 without LCD

Number of Channels

Double Channels (One for humidity and the other for temperature)
User can enable/disable any channels when setup via DGraph^TM

Memory Capacity

64KBytes(Total 32,000 readings for all channels)

Sample Rate

Can be selected from 10 seconds to 12 hours

Start Method

Immediately, Start by button, and Start at date&time

Stop Method

Stop when memory full, overwrite when memory full, stop by button and stop until specified number of sample points finished

Sample Mode

Instant(default), average, maximum and minimum
This will decide how to dispose data at idle time between a sample interval

Button

Software config to start logging bybutton, or clear and reset LED alarm when LED alarm is hold

LED

Red&green LED: Logger Status indication(Include Delay to Start, Logging, Alarm, Finished)
(Sofware can disable this two LED for saving power)
Yellow LED: Low battery indication

Alarm

User programmable high or low alarm limit for each channel(If necessary)
LED alarm and hold

Communication

Direct USB connection
Need to install the driver provided on CD

PC Software

DGraph^TM software and USB driver required (Included on CD)
(Compatible with Windows XP, Windows Vista, Windows 7&8(32 bit & 64bit Versions))
Use these software to setup, download, view graph and analyse data

Power Supply

User replaceable 1/2AA 3.6V Lithium Battery 1200mAh
NOTE: USB interface can supply power directly if necessary

Battery Life

Approx. 2 Years @ 1 Minute Sample Rate
Approx. 4 Years @ 10 Minute Sample Rate
Approx. 8 Years without any sample task
NOTE: It also Depends on ambient temperatures and using of LEDs

Operating Range

0 to 100%RH -35 to 80℃(-31 to 176℉)

Storage Range

Recommended: 20 to 60%RH 10 to 50℃(50 to 122℉)

Case Material

ABS, TPU, PC

Dimentions

123mm×37mm×23mm(4.8"×1.5"×0.9")

Weight

Approx. 90 grams(3.19 oz)

Mounting

Mounting bracket (Optional) or locking eyelet